Commercial Brick Veneer Systems in Aurora, CO

We install commercial brick veneer systems in Aurora, CO for multi story buildings and complex façades. Our crew works with anchors, shelf angles, and air barriers to create durable, ventilated wall assemblies. We follow project specifications closely to deliver consistent coursing and clean details around openings and corners.

Superior Masonry Aurora provides professional commercial brick veneer throughout Aurora, CO, Colorado and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (720) 927-8800 or request your free quote.

Commercial Brick Veneer That Fits Aurora’s Buildings and Budgets

Commercial properties in Aurora range from 1970s strip centers along Havana Street to newer office parks out toward the Tech Center. Each type of building needs a different approach to commercial brick veneer. At Superior Masonry Aurora, we start every veneer project by looking closely at the structure you already have, not forcing a one-size-fits-all system.

For older concrete block buildings, we often recommend a mechanically anchored brick veneer system that creates a controlled air space between the block and the veneer. This allows us to improve drainage and insulation at the same time we upgrade your exterior. For newer steel stud walls with sheathing, we focus on selecting the right air and water barrier and matching the brick anchors to the stud layout, so the veneer stays secure in Colorado’s wind and freeze cycles.

We also look at how your customers use the building. A retail storefront at Southlands needs a different level of impact resistance and detailing at pedestrian level compared with a medical office tucked inside a business park. Superior Masonry Aurora walks the property with you, notes high-traffic corners, loading areas, and snow pile locations, then designs the brick veneer system to handle those specific conditions instead of guessing from a set of plans in the office.

How a Commercial Brick Veneer System Is Actually Installed

If you have never seen a veneer project from start to finish, the process can seem mysterious. Here is how Superior Masonry Aurora typically handles a commercial brick veneer installation in Aurora, step by step.

First, we verify the substrate. On an existing building, that means exposing sections of block, concrete, or sheathing and confirming its condition, flatness, and load capacity. On new construction, we coordinate directly with your GC or structural engineer to confirm wall details, control joint locations, and shelf angle sizes before our crews ever arrive.

Next, we install or verify the weather-resistive barrier and flashing system. For framed walls, that usually means a fluid-applied or sheet air and water barrier, properly tied into window flashings, door pans, and roof terminations. At the base of the wall and over openings, we install through-wall flashing and termination bars, along with weep vents at set intervals to let moisture escape from the cavity.

Once the backing is ready, we lay out brick anchor locations. For commercial brick veneer in Aurora, we typically use corrugated or wire ties for low-rise block construction, and adjustable anchors with seismic clips for steel stud systems. Anchors are fastened into the structural framing, not just the sheathing, and we maintain the specified air space between the veneer and the backup wall to preserve drainage.

Only then do we start laying brick. Our masons set brick courses to string lines, maintain consistent joint widths, and keep the veneer plumb and level across long runs like shopping center facades. We tool the mortar joints to the profile you select, clean the face of the brick as we go, and coordinate expansion joints so they line up with control joints in the structure. At the end, we do a full clean, punch list, and joint sealant work at windows and transitions so the system performs like a true exterior envelope, not just a decorative skin.

Design Choices: Brick Types, Patterns, and Details That Work in Aurora

One advantage of a commercial brick veneer system is the amount of design control you have compared with structural brick. Superior Masonry Aurora helps you pick options that match your brand while still working with local codes, climate, and surrounding buildings.

Brick type is the first big decision. For office and medical buildings near the Anschutz campus, many owners lean toward smooth, modular bricks in muted earth tones that blend with existing institutional buildings. Retail and restaurant spaces in busier corridors often benefit from tumbled or wire-cut bricks with more texture, which hide minor scuffs and stains from day-to-day traffic. We bring sample boards from Colorado-friendly manufacturers so you can see how the brick looks in Aurora daylight, not just in a brochure.

Bond patterns and accent bands make a big difference on long commercial walls. Running bond is still the workhorse pattern for most facades, but we frequently add soldier courses above windows, rowlock sills at parapets, or a contrasting brick color band at the signage line to break up the elevation. On multistory office buildings, we use changes in brick color or pattern at floor lines to visually organize the facade without adding a lot of structural steel or cost.

Details around openings are another key design choice. Properly sized brick returns at windows and doors, well planned lintels, and integrated sealant joints can make the difference between a cheap looking facade and a professional one. Superior Masonry Aurora coordinates these details with your architect or directly with you if you are working without one, and we mock up a typical window bay on site when possible so you can approve the appearance before we run the pattern across the entire building.

Costs, Timelines, and Common Problems We Solve in Aurora

Commercial brick veneer costs in Aurora vary based on a handful of real-world factors: wall height, number of corners and openings, required structural steel (such as shelf angles), brick selection, and site access. A simple one story retail box with straight walls and good equipment access will be at the lower end of the range per square foot. A facade with many setbacks, column wraps, decorative bands, and complicated scaffolding will cost more per square foot even if the footprint is similar.

Local site conditions around Aurora matter as well. Properties along busy roads like Colfax or Parker often require additional safety barricades, night or off hour work, and coordination with the city for deliveries and staging, which can add to the schedule and labor cost. On tight infill sites near older neighborhoods, we may need to use smaller lifts or interior scaffolding systems because there simply is not room for full exterior staging.

Common problems we see when we are called to fix other contractors’ work include missing or improperly placed flashing, no clear drainage path from the veneer cavity, and anchors that miss the structural studs. In Aurora’s freeze thaw cycles, trapped moisture behind the veneer quickly leads to efflorescence on the surface, spalling brick faces, and joint cracking. Superior Masonry Aurora inspects for these issues on every project and designs the veneer as a complete moisture management system, not just a cladding.

On schedule, most straightforward commercial brick veneer jobs for a one story building can be completed in a matter of weeks once the substrate is ready. Larger office or mixed use buildings may require phased installation, especially in winter when mortar curing slows. We plan around typical Front Range weather, set realistic milestones, and communicate clearly about what needs to be in place ahead of our crews so your project does not sit idle waiting on coordination.

What Aurora Property Owners Should Check Before Hiring

Before you hire anyone to install a commercial brick veneer system, there are a few specific things you should ask that go beyond the usual license and insurance questions.

First, ask to see details or photos of previous veneer jobs that show through wall flashing, weeps, and anchor layout, not just pretty finished facades. A contractor that understands commercial brick veneer in Aurora will be able to talk comfortably about cavity width, control joints, and how they transition brick at grade, parapets, and window heads.

Second, request a mockup or at least a small test panel. Superior Masonry Aurora often builds a sample wall on site that includes the selected brick, mortar color, joint tooling, and any accent patterns. This avoids surprises once hundreds of square feet are already installed and gives you a real surface to approve in Aurora’s actual light and dust conditions.

Third, clarify who is responsible for coordination with other trades. Good veneer work depends on window installers, roofers, and framers doing their part. We are used to working with local GCs and can take the lead on confirming joint locations, sealant compatibility, and flashing tie ins, but this needs to be clear in the contract scope so no one assumes someone else is handling it.

Finally, make sure your proposal includes specific materials and manufacturers for anchors, flashing, and air and water barriers where applicable, not just generic descriptions. At Superior Masonry Aurora, we list these components so you can see exactly what is going into your commercial brick veneer system. This protects you from last minute substitutions and helps ensure that your building envelope will stand up to Aurora’s sun, wind, and snow for decades.